Continuous Blade Systems = Quick ROI

Continuous Doctor Blade   SystemWhat do food, chemicals, cosmetics, pharmaceuticals, and tobacco have in common with the paper towels sitting on your kitchen counter? The answer lies in how they are manufactured.

The process of removing a finished product from a drum, roll, or process belt with a blade is called creping. Optimizing the creping process used in tissue and towel making is critically important and involves cutting edge technologies to ensure the desired product attributes are achieved during the high-speed production process. However, many of the innovations used in tissue making have not yet been transferred to other industries that could also benefit.

Pressing a metal blade against a metal roll or belt to remove a product can create several problems for the manufacturer:

  1. Safety. The metal-on-metal contact sharpens the blade making it a safety concern for operators.
  2. Blade wear. As the blade wears, it is less effective at removing the product from the drum, roll, or process belt.
  3. Blade changes. Changing a blade potentially places the operator at risk when handling sharp blades. Replacement blade costs can add up quickly, especially if there are multiple changes during a shift. If the blade does not last an entire production run, productivity suffers.

While some manufacturing processes can be optimized by careful, strategic blade selection, others require outside-the-box thinking. Recently, we worked with a tobacco manufacturer that uses a stainless steel belt to dry a sheet of tobacco during a continuous process. The tobacco manufacturer used a clamp-style blade holder to load razor blade stock to the belt as it rotated over a drum. For years, management knew they were sacrificing considerable revenue due to product waste associated with each blade change. To reduce waste and increase productivity, we designed and built a continuous blade system that eliminated tobacco manufacturer’s major concerns.

A continuous blade system eliminates the need for blade changes during production runs by continuously advancing the blade through the blade holder at a pre-determined rate. The continuous blade system also improves safety by allowing new and used blade coils to be transferred in sealed containers (as shown in the image on this page).

Furthermore, the additional “slicing” action of the blade material advancing across the face of the roll/belt often improves the removal of product. This means less loading pressure can be used thereby increasing the life of the drum, roll, or process belt.

Lastly, this tobacco manufacturer received payback on their investment in less than six months.

To learn more about the Kadant continuous blade system, please email info@kadant.com.

One thought

  1. I have always thought this was a great idea. One of my customers said that their blade to ton cost were lower than any plant in their organization. We have done a good job with some of these and this is a great idea in my mind.

Comments are closed.